Next are described each one of the fields on screen:
[1]
Wavelenght of the Upstream signal (OLT).
[2]
Reference value from which is calculated the relative losses of the signal.
Reference value is captured.
[3]
Relative losses for the Upstream signal.
[4]
Wavelenght of the Downstream signal (ONT).
[5]
Reference value from which is calculated the relative losses of the signal.
Reference value is captured.
[6]
Relative losses for the Downstream signal. There is an arrow which indicates
if the value exceeds (arrow pointing up) or does not arrive (arrow pointing
down) to the minimum levels in order to be graphically represented.
[7]
Graphical representation of the power losses for Downstream.
[8]
This arrow indicates that the value is bigger than the scale of the graph. que
indica que el valor se sale de la gráfica representada.
[9]
Graphical representation of the power losses for Upstream.
[10] The ONT led indicates the status of the ONT signal with respect to the
threshold values. Three indicator lights colours are possible and each colour
represents status signal with respect to threshold values: GREEN (PASS),
AMBER (HIGH) and RED (LOW).
[11] The OLT led indicates the status of the OLT signal with respect to the
threshold values. Three indicator lights colours are possible and each colour
represents status signal with respect to threshold values: GREEN (PASS),
AMBER (HIGH) and RED (LOW).
To navigate through the editable fields on the screen press SEL
selected field changes to shaded.
To change a wavelenght, select it and press
To capture a new reference value, select the current reference value and press
both keys
and
To make or consult a logger refer to the section LOGGER Function.
Page 22
[5] simultenously.
USER'S MANUAL. PROLITE-65
or
[5].
[4]. The
07-2010