Operating Instructions; Optical Power Meter; Configuration - Promax PROLITE-65 Manual De Instrucciones

USER'S MANUAL PROLITE-65
4.2

Operating Instructions

Main functions of the PROLITE-65 are accesible through the main menu, which
you can access at by pressing the button CONFIG
- ATTENUATION TEST:
This option measures simultaneosuly and automatically losses for the three
wavelenghts trasmitted by a generator (PROLITE-105) installed at the end of
the fibre in order to certify the installation.
- OPTICAL LOSS TEST SET:
This option, besides measuring as in the previous option, it measures also the
optical power and displays its status relating to an editable threshold value.
-

OPTICAL POWER METER:

This option measures optical power at the OPM input (OLT) in the whole band
and allows you to take a reference value to measure from it.
- xPON / RFoG POWER METER:
This option measures the optical power from the signal coming from OLT
(Downstream) and the power coming from ONT (Upstream), allowing
communication between them.
- xPON / RFoG LOSSES METER:
This option measures losses for OLT and ONT signals at anywhere on the
network.
-

CONFIGURATION:

This option allows you to configure some parameters such as language, time, data,
contrast, etc.
- SETUP:
This option gives access to the visual fault locator, threshold edition and network
configuration.
07-2010
Figure 4.- MENU screen.
[2]:
Page 11