Introduction; Proper Use; Equipment; Scope Of Delivery - Parkside PSG 50 B2 Instrucciones De Utilización Y De Seguridad

Introduction

The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
V ~
Volt (AC)
W
Watts (Effective power)
n
Design no-load speed
0
Observe caution and safety notes!
Risk of explosion!!
Power carving tool PSG 50 B2
Introduction
Q
Please make sure you familiarise yourself
fully with the way the device works before
you use it for the first time and that you
understand how to handle electrical power tools cor-
rectly. To help you do this please read the accompa-
nying operating instructions. Keep these instructions
in a safe place. If you pass the device on to anyone
else, please ensure that you also pass on all the
documentation.

Proper use

Q
This carving device is intended for processing all
types of wood. For example, it can be used for
carving, renovating furniture, refurbishing antiques,
fine paint stripping and linocuts. Any other use or
modification to the drill / grinder shall be considered
as improper use and could give rise to considerable
dangers. The manufacturer will not accept liability
for loss or damage arising from improper use. Not
intended for commercial use.
30 GB/MT
Keep children away from electrical
power tools!
Caution – electric shock!
Danger to life!
Risk of loss of life by electric shock
from damaged mains lead or mains
plug!
Wear hearing protection, dust protection
mask, protective glasses and protective
gloves.
Dispose packaging and appliance in
an environmentally-friendly way!

Equipment

Q
ON / OFF switch
1
Bracket
2
Mains lead with plug
3
Ventilation slots
4
Tool holder
5
Cap nut
6
Blade inserts
7
Key
8

Scope of Delivery

Q
1 Motor carving device PSG 50 B2
3 Blade inserts
1 Key
1 Operating Instructions

Technical details

Q
Rated voltage:
Power rating:
Stroke rate when idling: n
230 V∼ 50 Hz
50 W
11500 strokes / min
0