Dmx Linking - Chauvet DJ Intimidator Trio Manual Del Usuario

Intimidator Trio QRG
Main Function
Setup
(cont.)
Sys Info

DMX Linking

Starting
Address
Master/Slave
Connection
Programming Levels
Color Balance
Sensitivity
Reset
Factory Set
Ver V_
Running Mode _ _ _ _ _
DMX Address _ _ _
Temperature _ _ _
The Intimidator Trio can work with a DMX controller when linked by DMX
serial connections. Instructions for connecting and configuring this product
for DMX operation are in the User Manual. If you are not familiar with
DMX, download the DMX Primer from www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 483.
The Intimidator Trio uses the DMX data connection for its Master/Slave
mode. Instructions for connecting and configuring this product for
Master/Slave operation are in the User Manual.
RED
GREEN
Selects color balance (100 to 255)
BLUE
WHITE
001–100 Sets sound sensitivity
Resets the product
Loads factory defaults
Displays the software version
Displays the current running mode
Displays the current DMX address
Displays the LED temperature in Celsius
7
Description
EN