Safety Warning; Warnings For The Installer; Warnings For Technical Maintenance Personnel - Palazzetti ECOFIRE JACKIE IDRO Manual De Instalación Y Mantenimiento

2

Safety warning

2.1 Warnings for the installer

Observe the prescriptions contained
in this manual.
The stove removal and installation
instructions must only be performed
by specialist technicians.
It is always recommended that users
contact our after sale service to
request qualified technicians. In the
case other technicians are involved, it
is recommended to verify their actual
abilities.
The responsibility of the works carried
out in the area where the stove will be
installed falls, and remains, on the user;
the latter is also entrusted with the
execution of the inspections related to
the installation solutions proposed.
The user must comply with all
local, national and European safety
regulations.
The appliance must be installed on floors
with adequate load bearing capacity
based on the weight of the product.
Check that the flue and air intake
predispositions conform to the
type of installation.
Do not carry out flying electrical
connections with provisional or not
isolated cables.
Check that the earthing of the electrical
system is efficient.
The person in charge of the installa-
tion, before starting assembling or dis-
assembling of the stove, must comply
with the safety precautions required
by law and in particular:
• they must not operate in adverse
conditions;
2.2 Warnings for technical
004778021 - 10/01/2020 - PN - Italy
• they must operate in perfect
psychophysical conditions and
must check that the personal
protective equipment, are intact
and functioning perfectly;
• they must wear safety gloves;
• they must wear safety shoes;
• they must use tools with electrical
insulation;
• they must ensure that the area
affected by the phases of assembly
and disassembly is free from
obstacles.
maintenance personnel
• Observe the instructions pro-
vided in this manual.
• Always use personal protective
equipment and other means of
protection.
• Before starting any mainte-
nance operation, make sure
that the stove has cooled
down if it has been used.
• If even one of the safety
devices is not working, the
stove must be considered
inoperative.
• Disconnect the stove from the
power supply before working
on the electrical, electronic,
connector and moving parts
( p e l l e t l o a d i n g s y s t e m s ,
automatic burn pot cleaning
systems, etc.).
39