User Settings; Switch Backlight On/Off; Setting Auto Power Off; Calibration - MS Schippers MS Animal ID Instrucciones Para El Uso

10. User settings

10.1 Switch backlight on/off

Hold the key in for 3 seconds, display shows "setbl". Press
key to choose an option (BL ON: always on, BL AU: auto backlight, now the backlight comes on
as soon as a key is pressed or a weight is placed on the scale, BLOFF: backlight always off), press
to confirm, press

10.2 Setting Auto Power Off

Hold the key in for 3 seconds, display shows "setbl". Press
Press key to enter your selection, press
(ON: always ON, 5: switch off auto after 5 mins. without operation, or 15: auto-switch off after
15 minutes without operation), press

11. Calibration

1. To set calibration, turn on the scale.
2. While it starts press the
3. The display now shows pn
4. Press consecutively on
5. Press a few times, until the display shows p3 cal
6. Confirm with the
7. Press the button, the display now shows unld
8. Ensure that the scale is completely empty and that nobody/nothing is leaning on it
9. When the display shows stable (upper left), press the
10. Select a calibration weight (at least 75 kg), for example a couple of bags of forage
11. Set the chosen calibration weight. Press
press to change the value of that position.
12. Press to confirm the chosen calibration weight.
13. The display now shows load
14. Place the chosen calibration weight in the scale
15. When stable appears, press
to escape.
key to choose the auto power off time
key to confirm, press
button 1 x
, and
button, now the display shows nonlin
or
to confirm
key to enter backlight, press
key, display shows "setoff".
key to go back.
the display now shows po chk
button
to choose the desired position and
31