Craftsman 126.32564 Manual Del Operador página 35

WARNING l
To avoid injury from accidental starting, always turn switch OFF and unplug the
machine before attempting any maintenance or carrying out any adjustments
to your miter saw.
TROUBLE SHOOTING GUIDE - MOTOR
PROBLEM
Motor does not start.
Brush spark when switch is
released.
PROBLEM CAUSE
1. Fuse blown or circuit breaker
tripped on home panel.
2. Worn motor brushes.
1.Worn brushes.
2. Other.
SUGGESTED CORRECTIVE
ACTION
1. Verify there is electrical
power at the power outlet.
Replace brushes.
See MAINTENANCE section
1. Replace brushes..
See MAINTENANCE section
2. Contact Sears Service
Center.
35