Removing Shipping Hardware; Installing Hole Plugs - Kenmore 137630800 A Instrucciones De Instalación

Unpacking Washer

Removing shipping hardware

Remove all of the following:
4 BOLTS
2 P CLAMPS

Installing hole plugs

2 P CLAMPS
4 SPACERS
4 HOLE PLUGS
(IN BAG)
Rubber expansion material on spacers
may need time to relax before they can
be easily pulled through shipping hole. You
may have to exert some force to pull out if
spacer material has not yet fully relaxed.
x 2
x 4
4 SPACERS
IMPORTANT
Save all shipping bolts and spacers for future use. If the
washer is to be transported at a later date, the shipping
hardware must be reinstalled to help prevent shipping
damage.
Locate 4 hole plugs in the small bag supplied
with washer instruction guides. Insert them in the
holes in washer back panel.
x 4
8
NOTE
x 4
4 BOLTS