Panasonic AW-RP50E Manual De Usuario página 11

Selecting the settings for a selected remote camera
Manually adjusting the white balance
( Setting the R and B gain values)
1
As with the automatic adjustment, fill the
screen with a white subject.
2
Connect a waveform monitor or colour monitor
to the video output connector on the currently
selected remote camera.
3
Set the MENU button to ON.
Press the MENU button to light its indicator.
4
Set the PRESET MEMORY/MENU 2 button
(R/BGAIN) to ON.
When the button is pressed and its indicator lights, the
[R/BGAIN] menu is displayed on the LCD panel.
5
Turn the F1 dial to select the R gain setting;
similarly, turn the F2 dial to select the B gain
setting.
RG A IN :
BG A IN :
Note
The settings will differ depending on the remote camera
connected.
For further details, check the Operating Instructions of
the model concerned.
±0
F1 dial
±0 F2 dial
10 (E)
Auto tracking white adjustment (ATW)
This function provides compensation automatically so that
the white balance is adjusted even when the light source or
colour temperature changes during shooting, so that images
that appear the least odd (that is, the most natural looking)
are produced.
1
Set the MENU button to ON.
Press the MENU button to light its indicator.
2
Set the PRESET MEMORY/MENU 4 button
(AWB/ABB) to ON.
When the button is pressed and its indicator lights, the
[AWB/ABB] menu is displayed on the LCD panel.
3
Turn the F1 dial to select ATW.
AW B MOD:
SE T
  If there is no white on the screen, it may not be possible
to compensate the white balance properly.
Similarly, under certain light source and colour
temperature conditions, it may not be possible to
compensate the white balance properly.
Note
The settings will differ depending on the remote camera
connected.
For further details, check the Operating Instructions of
the model concerned.
ATW
: AWB