Festo FDG Serie Instrucciones De Utilizacion página 20

FDG−...
In order to scan the slide positions:
use sensors with inductive switching principle together with ferritic switching tags.
S
Due to the clean outer slide, the FDG does not possess magnets.
You can protect unused sensor grooves from dust deposits by using cover rails.
6 Commissioning
If the emergency buffers are used:
Check to see if the support of the emergency buffer is displaced or is damaged
S
asymmetrically.
If this is the case, the support KYP−... must be positioned again.
When doing this, make sure that you tighten the clamping screws again.
Pull gently on the adhesive connection between the emergency buffer and the
S
support.
If the adhesive layer or the emergency buffer is damaged, you must replace the
emergency buffer completely.
7 Care and maintenance
Lubricating the roller bearing guides types FDG−...−KF:
Observe the lubricating intervals:
S
Lubricant type
Festo special grease LUB−KC1
Festo special grease LUB−RN2 5000 km
Fuchs Notropeen LXG00
Fig. 16: Lubricants und lubrication intervals
20
1. Interval 2. ... n. Interval
FDG−8 ... 18
5000 km 400 km
400 km
5000 km 5000 km
FDG−25 ... 63
5000 km
not permitted
Festo FDG−... 0612a English