Full Reset - M-Audio KEYSTATION MINI 32 Guia De Inicio Rapido

Edit Button
The Edit button is used to access the advanced Keystation Mini 32 functions located on the
keybed.
Pressing the Edit button switches your keyboard into Edit Mode. The Edit button turns blue, and
you can use the keys to select various advanced functions and enter data.
Depending on the function, your keyboard will exit Edit Mode as soon as a function is selected,
or the Cancel or Enter keys are pressed. At this point, the Edit button light will dim, and the
keyboard can be used for playing notes again.
To change the functionality of the Mod button, Volume knob, etc.:
1. Press Edit, the Edit button will now be fully lit.
2. Press the button corresponding to the control you would like to change (for example:
MOD).
3. Use the numeric keys to enter the value of the control, and then press the Enter key.
If you have made an error while entering the control value, you can press Cancel to exit
Edit mode without making changes.
To learn more about Edit Mode and Keystation Mini 32's advanced functions, please see the full
User Guide, available at m-audio.com/keystationmini32.

Full Reset

To reset the keyboard to factory defaults:
1. Make sure your computer is powered on.
2. Power the Keystation Mini 32 by plugging in the USB Cable from your computer while
simultaneously holding down the Oct/Data "+" and "-" buttons.
6