MZ electronic FF-300 Instrucciones De Uso página 25

The gasket must be placed between the instrument and the dashboard.
Follow the indications in the attached electrical diagram for the electrical connection. The
wires must have a minimum section of 1.5 mm².
Assemble a 1A (ampere) rapid protection fuse on the cable + of the battery. Do not use
the voltage coming from the engine battery group for feed.
The instrument complies with the EMC (EN55022) standard and must be positioned at a
distance of:
- 30 cm (~1 ft) from the compass;
- 50 cm (~1.5 ft) from radio equipment;
- 2 meters (~6.5 ft) from radiobroadcasting equipment;
- 2 meters (~6.5 ft) from the radar beam.
FF-300 - 25 -
English
Rev. 05-2011