First Start Up - MZ electronic FF-300 Instrucciones De Uso

English

First start up

The FF-300 fuel flow meter is equipped with a graphic display and three keys:
(ON), (UP) and (DOWN). Furthermore, there is a buzzer that
signals the pressure on the keys.
The ON key must be used to have access to the parameter set up menus, to
select the parameters to be modified and to confirm the set values. The display
lighting turns off 30 seconds after the last command is given (a modifiable
default time – see "BkLight Time").
The UP and DOWN keys enable moving from
the screen with total and instantaneous
consumption to screens concerning travel 1
and travel 2 data. While setting the
parameters, they permit moving inside the
menus and varying the parameter values.
When the instrument is turned on it emits a sound and the following page
appears for a few seconds:
FUEL FLOW
Once the start up procedure has been completed, the main screen is
displayed:
FF-300 - 27 - Rev. 05-2011