Troubleshooting - Wolf OG30 Guía De Usuario

Ocultar thumbs Ver también para OG30:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING

Troubleshooting
Burners do not light.
Push burner control knob in and verify igniter glows.
Verify electrical power to grill and home circuit breaker
is on.
Verify GFCI has not been tripped.
Purge line of trapped air.
If no electrical supply is available, burners can be lit
manually. Refer to page 9.
Hot surface igniter does not operate.
Verify electrical power to grill and home circuit breaker
is on.
Verify GFCI has not been tripped.
Burners do not heat properly.
Verify proper gas supply.
Verify gas supply line is not bent or kinked.
Preheat burners for 10 minutes.
Inspect grill burners for spiders, insects or other
obstructions.
WARNING
Spiders and insects can nest in burners causing a fire
hazard and damage to the grill.
Burner flame blows out.
Verify proper gas supply.
If exposed to wind, provide a wind block.
Smell of gas is present.
Contact Wolf factory certified service or gas supplier to
check for gas leak.
Wolf, Wolf & Design, Wolf Gourmet, W & Design and the color red as applied to knobs are registered trademarks and service marks of Wolf Appliance, Inc. Sub-Zero,
Sub-Zero & Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, and Ingredients are registered trademarks and service marks
of Sub-Zero, Inc. All other trademarks or registered trademarks are property of their respective owners in the United States and other countries.
|
14
Wolf Customer Care 800.222.7820
Excessive flare-ups occur.
Clean burner grates.
Excess fat on meat or excessive cooking temperature.
Interior or control knob lights do not operate.
Verify electrical power to grill and home circuit breaker
is on.
Verify GFCI has not been tripped.
Interior light bulb may need to be replaced.
SERVICE
Maintain the quality built into your product by contacting
Wolf factory certified service. For the name of the
nearest Wolf factory certified service, check the contact
& support section of our website, wolfappliance.com or
call Wolf customer care at 800-222-7820.
When contacting service, you will need the model and
serial number of your product. Both numbers are listed
on the product rating plate. Refer to page 6 for rating
plate location.
For warranty purposes, you will also need the date of
installation and name of your authorized Wolf dealer. This
information should be recorded on page 2 of this guide.

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Og36Og42Bm13Og54

Tabla de contenido