Descargar
Compartir
Imprimir esta página
Sanus LF228 Manual Del Usuario
  1. Manuales
  2. Marcas
  3. Sanus Manuales
  4. Montajes de TV
  5. LF228
  6. Manual del usuario
Sanus LF228 Manual Del Usuario

Sanus LF228 Manual Del Usuario

Ocultar thumbs Ver también para LF228:

Publicidad

Enlaces rápidos

Descargar este manual
LF 228 INSTRUCTION MANUAL
We'll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-800-359-5520. We're ready to help!
Scan for easy install video
http://san.us/777

Publicidad

loading

Manuales relacionados para Sanus LF228

Resumen de contenidos para Sanus LF228

  • Página 1 LF 228 INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. We’re ready to help! Scan for easy install video http://san.us/777...
  • Página 2 Does your TV weigh more than 135 lb (61.2 kg) including accessories? 135 lb No — Perfect! (61.2 kg) Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-800-359-5520 (UK: 0800-056-2853) to fi nd a compatible mount. What is your wall made of? Drywall with Solid concrete or...
  • Página 3 Dimensions 3.5 TO 28.0 Level [mm] [88.8MM TO 710MM] 3.33 84.6 TILT 1.96MIN - 21.625MAX 23.00 50mm - 550mm 584.2 4.75 min TO 33.25 max [120MM min TO 850MM max] 31.05 788.67 24.00 609.6 16.00 406.4 19.28 11.56 489.6 293.6 15.60 396.2 16.00...
  • Página 4 Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used.
  • Página 5 Parts and Hardware for STEP 2 Parts and Hardware for STEP 3 Wall Plate Concrete Anchors Assembly Washers Mounting Screws Safety 5/16 in. Screw Lag Bolts 1032 x 1/4 in. 5/16-18 x 1 in. 5/16 x 3 1/2 in. Hardware for Cable Managment Hardware for Adjustments Hex Keys Cable Ties...
  • Página 6 STEP 1 Attach Bracket to TV 1-1 Select TV Screws 1-2 Select TV Spacers Hand thread screws into the threaded inserts on the back of your TV Spacers and screws are supplied to install your TV bracket. to determine which screw diameter (M4, M5, M6, or M8) to use.
  • Página 7 1-3 Determine TV Hole Pattern Loosen the upper fastener and lower fastener using hex key and adjust TV bracket to fit the hole pattern of your TV. Be sure that the center column is aligned with the center of your TV. Tighten the upper fastener and lower fastener CAUTION: Avoid potential injuries or property damage! Do not overtighten fasteners...
  • Página 8 1-4 Attach TV Bracket Press the four shoulder washers through the openings of the TV bracket that line up with your TV hole pattern. Snap the four spacers you selected in STEP 1-2, onto shoulder washers...
  • Página 9 Center the TV bracket over your TV hole pattern as shown, making sure the brackets are level. Install using the spacer, screw and washer combination you selected for your TV. NOTE: Use washer for screws Use washer for screws Flat Back NOTE: Standard confi...
  • Página 10 Stud centers must be verified – not all walls have conventional 16 in. (406 mm) stud spacing. Verify the center of the stud(s) using an awl, a thin nail, or an edge to edge stud finder. Level the wall plate and mark the hole locations. NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com. Max. Min. 5/8 in.
  • Página 11 Drill the four pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. IMPORTANT : Pilot holes must be drilled to a depth of 3 ½ in. (89 mm). Install the four washers and lag bolts . Tighten all four lag bolts only until the washers are pulled firmly against the wall plate CAUTION:...
  • Página 12 Level the wall plate and mark the five hole locations, four in the corners and one in the top inner-most hole location as shown. NOTE: For assistance in determining wall plate location, see Height Finder at sanus.com. Drill five pilot holes using a 3/8 in. (10 mm) diameter drill bit.
  • Página 13 Insert five concrete anchors CAUTION: Be sure the anchors are seated flush with the concrete surface. Install the five washers and lag bolts . Tighten all five lag bolts only until the washers are pulled firmly against the wall plate CAUTION: Improper use could reduce the holding power of the lag bolts .
  • Página 14 STEP 3 Attach TV to Wall Plate 3-1 Attach Arm Assembly to Wall Plate Insert the three tabs of arm assembly into the three slots of the upper moveable bracket in wall plate NOTE: Make sure the bottom mounting holes in arm assembly align with the corresponding lower moveable bracket CAUTION:...
  • Página 15 3-2 Hang TV onto Arm Assembly HEAVY ! You may need assistance with this step. Position arm so the elbow is pressed against the wall. Tighten the tension adjustment dial to prevent the arm from moving while installing the TV. Attach the TV bracket to arm assembly .
  • Página 16 Tilt TV upward. If nessessary, adjust the tilt tension knobs , by hand. Install and tighten safety screw CAUTION: Avoid potential personal injury or property damage! This safety screw must be installed to secure the TV onto arm assembly Remove the two wall plate inserts from wall plate...
  • Página 17 Manage Cables Remove the cable cover from the arm NOTE: Press down on the end of the cable cover shown, to free the other end. Install the cable tie clips and cable ties into the bottom of the arm , as shown. Pull each arm to its full extension then route the cables through the arms , leaving enough slack to prevent stretching the cables...
  • Página 18 Adjustments LEVEL TILT Your TV should adjust easily when moved, then stay in place. Adjust the tilt tension knobs , by hand, if your TV naturally tilts up or down. NOTE: If you do not intend to adjust the tilt for different viewing locations, you can tighten the tilt tension knobs to prevent unwanted movement.
  • Página 19 TV LATERAL SHIFT TV HEIGHT HEAVY ! You may need Loosen or tighten the height assistance with this step. screw using hex key to adjust the height of the TV. CAUTION : Avoid potential injuries or property damage! Do NOT adjust the arm position from center for concrete applications.
  • Página 20 SWIVEL EXTEND / RETRACT REMOVING THE TV HEAVY ! You may need assistance with this step. To remove the TV: (Reverse procedures in STEP 3-2.) Adjust the left/right swivel Adjust the arm tension by turning the tension Unscrew the safety screw tension by turning the swivel adjustment dial , by hand, or adjusting...

  • Página 22: Listo Para Comenzar

    ¿Su televisor pesa más de 61,2 kg (135 lb) incluyendo los accesorios? No — ¡Perfecto! 61,2 kg (135 lb) Sí — Este soporte NO es compatible. Visite MountFinder.Sanus.com o llame al 1-800-359-5520 (Reino Unido: 0800-056-2853) para encontrar un soporte compatible. ¿De qué está hecha su pared? Tabiques de yeso con Hormigón sólido o...
  • Página 23 ESPAÑOL Piezas y elementos de sujeción Ver PÁGINA ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor. Póngase en contacto con el servicio de atención al cliente.

  • Página 24: Opción Para Montantes De Madera

    NOTA: Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com. Haga los cinco orificios guía con una mecha de 5,5 mm (7/32") de diámetro.
  • Página 25 NOTA: Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com. Haga los cinco orificios guía con una mecha de 10 mm (3/8") de diámetro.

  • Página 26: Organizar Los Cables

    ESPAÑOL de modo que el codo quede presionado contra el muro. Ajuste el dial de ajuste de tensión D para evitar que el brazo se mueva Coloque el brazo cuando instale el televisor. Acople el soporte del televisor al módulo del brazo .
  • Página 27 ESPAÑOL Solución de problemas El televisor no se queda en su posición y se inclina hacia arriba: 1. Ajuste la tensión de las perillas de inclinación K . 2. Si el problema persiste, utilice espaciadores más largos para el soporte del televisor (PASO 1). El televisor no se queda en su posición y se inclina hacia abajo: 1.
  • Página 28 Thank you for choosing Sanus! Please take a moment to let us know how we did: Call us: 1-800-359-5520 Email us: info@sanus.com Leave a review: sanus.com UK: 0800 056 2853 Like us on Facebook.com /sanussystems Follow us on Twitter: @ sanussystems Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete.