CAME BIANCA-VC 001CS2BNC0 Manual De Instalación página 9

PROGRAMMING
y For call programming, see the entry panel documentation.
X 5
beep
a
b
c
d
VAS/101
M2
+
–
A
230 V
Accessing programming Press the button
that programming has been accessed a.
Programming the melody associated to the call from the entry panel (1 acoustic signal). To hear
the melodies in sequence, press the button b. To select the melody and exit programming, press the
button c. To select the melody and continue with programming, press the button
Programming the melody associated with the doorbell (2 acoustic signals). For this type of pro-
gramming b c d proceed as previously described for "Programming the melody associated to the
call from the entry panel".
Programming the number of call rings (3 acoustic signals). press the button the number of times
equal to the number of rings selected for the call (from 1 to 6 rings) e. 3 s after the button is pressed
the last time, the call selected for the selected number of rings will be will be reproduced. To select the
melody and exit programming, press the button
e
BIANCA-VC
M1
AL
–
+
B
CL RES
M/S
BIANCA-VC
M1
AL
–
+
B
CL RES
M/S
BIANCA-VC
M1
AL
–
+
B
CL RES
M/S
PLACO-VC
M1
+
-
BOUT
M2
-
-
Relais
Automatisme
12Vcc
CAME
five times within 5 s. A brief acoustic signal will confirm
f.
f
Bianca
1.
3
1.
2
1.
1
d.
5
EN