First Step - Kenwood KDC-X494 Guia De Inicio Rapido

First step

[ ]
[FNC]
Exit Demonstration Mode
Turn off the demonstration mode
when you use it for the first time after
installation.
1
Press the [ENTER] button to quit
the demonstration mode when the
messages "To Cancel DEMO Press the
ENTER Key" are displayed (approx. 15
seconds).
2
Turn the Control knob to select "YES",
and then press the [ENTER] button.
The demonstration mode can also be
canceled in the Function setting mode.
Refer to <Function setting> (page 16) of
Instruction manual.
Adjusting the Clock & Date
1
Press the [FNC] button to enter the
Function setting mode.
2
The item can be selected and
determined as follows.
➜
"Settings" "Clock & Date"
Adjust"
To select the item, turn the Control
knob. To determine the item, press the
[ENTER] button.
3
Turn the Control knob to adjust the
hour, and then press the [ENTER] button.
4
Turn the Control knob to adjust the
minute, and then press the [ENTER]
4 | Quick Start Guide
Control Knob
[ENTER]
➜
"Clock
button.
5
Turn the Control knob to select "Date
Adjust", and then press the [ENTER]
button.
6
Turn the Control knob to adjust the
year, and then press the [ENTER] button.
7
Turn the Control knob to adjust the
month, and then press the [ENTER]
button.
8
Turn the Control knob to adjust the day,
and then press the [ENTER] button.
9
Turn the Control knob to select "Date
Mode", and then press the [ENTER]
button.
10
Turn the Control knob to select Date
format, and then press the [ENTER]
button.
11
Press the [
second to exit the Function setting
mode.
] button for at least 1