Graf ANAEROBIX Manual De Instrucciones página 18

7.
Fit seal on Herkules tank. Follow installation in-
structions for Herkules tank!
9. Upper half-shell
Position Herkules support pipe in centre of upper
half-shell.
11.
Fully assemble Herkules tank according to instal-
lation instructions.
4. Fitting the installation kit
Upper half-shell
Upper half-shell
Insert DN 110 pipe section through outlet hole
from the outside, narrower end first.
Connect filter pipe to outlet pipe and fit in the DN
200 fitting opened previously.
Tie the cord on the bag of carrier material and
push into the filter pipe.
17 / 44
8.
10.
Upper half-shell
12.