How To Operate - Nostalgia Electrics Vintage Collection CCP510 Manual De Instrucciones

HOW TO OPERATE

Before first use, clean the inside of the unit by wiping with a moist,
non-abrasive sponge, towel or cloth and then wipe with a non-
abrasive dry towel. Wipe down the inside of the Kettle and be
sure it is properly placed in the brackets before starting.
1. First, find a flat surface near an electrical outlet before
starting. Make sure your cord is away from any water source.
It is acceptable to use an extension cord if needed.
2. Gather your popcorn making supplies: popcorn, seasonings, bowls or bags for
holding the popcorn, cooking oil, Kernel Measuring Cup and Oil Measuring Spoon.
(Kernel Measuring Cup and Oil Measuring Spoon are included with your unit).
3. Make sure Kettle is properly secured in support brackets.
4. Make sure Kettle motor is plugged in.
5. Plug in the appliance while switch is flipped to OFF position.
6. Turn appliance ON by flipping the switch on the top of the
machine (see illustration above for location of switches). Allow
the appliance to run 3-5 minutes to heat up Kettle.
7. Once Kettle has heated, turn unit OFF before adding ingredients.
8. Use the Oil Measuring Spoon supplied with your OLD FASHIONED MOVIE
TIME POPCORN CART to add 2 tablepoons of your favorite popcorn cooking
oil to the Kettle. For every Measuring Cup full of kernels (4 oz.), add 2
tablespoons of oil. For best results, light vegetable oil is recommended.
9. Add 4 ounces of popcorn kernels to the Kettle
using supplied Kernel Measuring Cup.
10. Close the door and turn unit ON. In no time at all, you will hear
the popping begin. Fresh, hot popcorn will begin to burst out
of the flip lids on the Kettle - just like at the theater!
10