Power Supply; Initial Settings; Time Setting; Date Setting - Palazzetti ECOFIRE VIOLETTA Manual De Instrucciones

8 PRELIMINARY
OPERATIONS
8.1 LOADING THE PELLETS
The pellets are loaded into in the hopper using a
scoop.
Do not empty the sack directly into the hopper so
as to avoid loading sawdust or other foreign bodies
that may affect proper stove operation and avoid
spilling pellets outside of the hopper.
Make sure the hopper lid is well closed again after
having loaded the pellets.

8.2 POWER SUPPLY

Plug the stove into the mains power supply, move
the power switch at the rear of the stove to position
"I" (Fig. 8.1). If the connections are correct the stove
will emit a series of intermittent beeps and the
display will come on. After 2 seconds the display
will show "OFF" and the second row will show the
operating parameters: POWER, AIR FAN, SET
ROOM T..
On Silent series stoves (no ventilation) the "air fan"
parameter is not featured.
If not using the appliance for an extended period,
the switch at the rear of the stove should be moved
to position (O).

8.3 INITIAL SETTINGS

The language, current date and time need to be set
before using the stove.
8.3.1 language setting
Go to the "STOVE SETTINGS MENU" following the
"Procedure for accessing the menus" and press OK.
1) Scroll the submenus using the
2) Use the button to select the "LANGUAGE"
menu
3) Select the desired language using the
button
5) Press ("x") to exit the submenu (press the
OFF
same button again if necessary to go back
another menu level).

8.3.2 Time setting

Go to the "STOVE SETTINGS MENU" following the
"Procedure for accessing the menus" and press OK.
4) Scroll the submenus using the
5) Use the
6) Select the current day using the
7) Select the current hours using the
or button
8) Select the minutes hours using the
or
9) Press
("ok")

8.3.3 Date setting

Go to the "STOVE SETTINGS MENU" following the
"Procedure for accessing the menus" and press OK.
4) Scroll the submenus using the
5) Use the
6) Select the current day, month and year desired
7) Press
button to select the "TIME" menu
("x") to exit the submenu (press the
OFF
same button again if necessary to go back
another menu level).
button to select the "DATE" menu
using the or
selection by pressing ("ok")
("x") to exit the submenu (press the
OFF
same button again if necessary to go back
another menu level).
Fig. 8.1
or button
or
("ok")
or
("ok")
or
("ok")
or button
49