Preliminary Operations; Power Supply; Initial Settings; Time And Date Setting - Palazzetti ECOFIRE IDRO Manual De Instalación, Uso Y Mantenimiento

8 PRELIMINARY
OPERATIONS
8.1 LOADING THE PELLETS
The pellets are loaded into in the hopper using a
scoop.
Do not empty the sack directly into the hopper so
as to avoid loading sawdust or other foreign bodies
that may affect proper stove operation and avoid
spilling pellets outside of the hopper.
Make sure the hopper lid is well closed again
after having loaded the pellets. Un interruttore
di sicurezza (solo per i modelli dove previsto) ne
Se si vuole sfruttare la funzione di "autonomia",
a questo punto, portarsi con i tasti freccia
sull'icona combustibile
Selezionare con i tasti
premere invio
Se si vuole disabilitare tale funzione, invece di
"FULL" selezionare "OFF".

8.2 POWER SUPPLY

Plug the stove into the mains power supply, move
the power switch at the rear of the stove to position
"I" (Fig. 8.2). If the connections are correct the stove
will emit a series of intermittent beeps, the display
will come on.
If not using the appliance for an extended period,
the switch at the rear of the stove should be moved
to position (O).

8.3 INITIAL SETTINGS

The language, current date and time need to be set
before using the stove.

8.3.1 Time and Date setting

Use the arrow buttons
a) Use the
i) Press
46/140
USE AND & MAINTENANCE
e premere invio
la dicitura "FULL" e
.
to go to the Timer menu
buttons to scroll the submenu
INSTALLATION MANUAL
.
.
.
buttons and press
buttons and press
buttons and press
buttons and press
buttons and press
- cod. 004771060 - 09/2011 - Palazzetti - PN - Italy
IS
Fig. 8.1
Fig. 8.2
buttons