Intended Use; Symbols And Conventions; Product Specifications; Overview - VWR VisiScope 384 Serie Manual De Instrucciones

6. Connect the external power supply cable to the socket on the back of
the microscope.
If there is no need to install additional accessories,
the instrument is now ready for use.

Intended use

For research and teaching use only. Not intended for any animal or human therapeutic or diagnostic use.

Symbols and conventions

The following chart is an illustrated glossary of the symbols that are used in this manual.

Product specifications

Head
Eyepieces
Bertrand lens
Polarizing
attachment
Nosepiece
Objectives
Focusing system
Stage
Condenser
Illumination
Power supply

Overview

CAUTION
This symbol indicates a potential risk and alerts you to proceed with
caution
Trinocular, 30° inclined, 360° rotating.
WF10X/20mm with cross hair.
Swing-out type; centrable.
0°-90° rotating analyzer filter. Tint plates included: 1° order red (λ), λ/4, quartz wedge.
4-positions with centering mechanism for all objectives.
E-PLAN IOS POL (Strain-free) 4x/0.10, 10x/0.25, 40x/0.65, 60x/0.80.
Coaxial coarse and fine.
160mm dia.; 360° rotating with stop knob and 0.1° Vernier.
N.A. 1.25, with iris diaphragm, focusable and centrable. With rotating polarizer filter.
P-LED , with manual brightness control.
3
External power supply: Input 100-240Vac 50-60Hz / Output 6Vdc 1A
5
BERTRAND LENS
CENTERING SCREWS (10)