Unpacking; Intended Use; Symbols And Conventions; Product Specifications - VWR Visiscope 400 Serie Manual De Instrucciones

Unpacking

The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge of the contain-
er and lift the top half of the container. Take care to ensure that the optical items (objectives and eyepieces)
do not fall out and get damaged. Using both hands (one around the neck and one around the base), lift the
microscope from the container and put it on a stable desk.
Place the observation head onto the top of the neck and tighten the lock-screw. Insert the eyepieces into the
eye tubes.
Connect the provided power supply to the power supply input jack on the rear of the microscope.

Intended use

For research and teaching and teaching use only. Not intended for any animal or human therapeutic or
diagnostic use.

Symbols and conventions

The following chart is an illustrated glossary of the symbols that are used in this manual.

Product Specifications

Head
Trinocular, 45° inclined
Eyepieces
EWF 10x/22mm, high-point.
Nosepiece
Quintuple
Objectives
IOS PLAN LWD 10xPh, 20xPh, 40xPh
Stage
Fixed stage, dimension: 250x160 mm
Focusing
Coaxial coarse and fine focusing
Condenser
LWD pre-centered, N.A. 0.30, working distance 72 mm
Illuminator
Transmitted Light:
P-LED , white 8W LED, light intensity control
8
Epi-fluorescence:
18W LED, light intensity control
Condenser
Epi-fluorescence:
Blue and green filters
Brightfield
Green filters
CAUTION
This symbol indicates a potential risk and alerts you to proceed with
caution
4