GreenWorks TL08B00 Manual Del Propietário página 14

ASSEMBLY
ASSEMBLING THE WHEELS
The wheels are used to control the depth of operation. To adjust the height of the cultivator:
1. Disconnect from power source.
2. Place cultivator in a stable position.
3. Insert the wheel assembly into the support rod.
4. Align wheel assembly hole to desired position. Slide bolt through hole and attach hitch
pin to bolt.
5. The highest tilling is Position A and
6. Wheels can be removed for greater tilling depth.
(See Figure. 4)
lowest
SUPPORT ROD
BOLT
Position B.
WHEEL ASSEMBLY
14
HITCH PIN
POSITION A
POSITION B
Fig. 4