GreenWorks TL08B00 Manual Del Propietário página 16

ASSEMBLY
TINES INSTALLED CORRECTLY
NOTE:
tine blades should point towards the ground (Fig. 6).
NOTE: The tiller will not operate properly if the tines are not installed correctly. If there is a problem with the
cultivating operation of the tiller, check the tines for proper positioning.
NOTE: The directional arrow that is displayed on each tine should point toward the front.
FLUTE
INSTALLING TWO TINES FOR TILLING A NARROW AREA
Place tine (A) onto the shaft, and place tine (D) onto the other side shaft. Insert the hitch pin into
the holes in order to secure the tines to the tine shaft. (Fig. 7)
D
(See Figure. 6)
GEAR BOX
D
C
FLUTE
A
B
16
FLUTE
RING PIN
Fig. 6
(See Figure. 7)
Fig. 7
A