Aiwa AV-D50 Manual De Instrucciones página 4

CONNECTIONS
CONNECTING EQUIPMENT
Jacks and plugs of the connecting cord are color-coded as
follows:
Before connecting the AC cord
Red jacks and plugs : For the right channel of audio signals
The rated voltage of your unit shown on the rear panel is 120 V
White jacks and plugs: For the left channel of audio signals
AC. Check that the rated voltage matches your local voltage.
Yellow jacks and plugs: For video signals
IMPORTANT
m
Connect the speakers, antennas, and all other external
Insert the plugs fully into the jacks. Loose connections may
equipment first. Then connect the AC cord at the end.
produce a humming sound or other noise interference.
'f Be sure to connect the VIDEO OUT terminal of a DVD player
directly to a TV set, not through this unit. Otherwise, the picture
noise may appear when playing the DVDS copy protected.
*2 Input sound through the 5.1 INPUT terminals cannot be
recorded, When recording the sound from the DVD player,
connect the AUDIO OUT (DOWN MIXING) terminals of the
DVD player to the VIDEO l/DVD/MD AUDIO IN terminals of
the unit,
*3 When connecting a monaural video, use a stereo-mono
connecting cord (not supplied).
-
F
u
ano
m
G
==0-- . . . . . ~
Q""
-m---
'""==
VIDEO 3
,,.. ..
,' -,,
,/,.
Camcorder
[ ', ;
. . ../ .. .. " ~. . ...
Vlus )
IN L-AUDIOIN-R
to VIDEO OUT1
to AUDIO OUT
/
3
ENGLISH