Whirlpool WDF331PAH Manual De Instrucciones Para El Usuario página 9

OPTION SELECTIONS
OPTIONS
Runs dishwasher at a later time. Select a wash cycle
and options. Each time you press the delay button,
it will display the next available delay time. Press
DELAY. Press START/RESUME. Close door firmly.
NOTES:
The dishwasher remembers the last Delay you
■
selected. To reset the delay time to something
other than what is displayed, continue to press
the Delay button until the desired delay time is
reached.
Anytime the door is opened (such as, to add a
■
dish); START/RESUME must be pressed again to
resume delay countdown.
To turn on lock, press and hold "4-Hr Delay" button for 3 seconds. Control Lock light will stay on for a short time,
indicating that it is activated and all buttons are disabled. If you press any button while your dishwasher is locked,
light flashes 3 times. Dishwasher door can still be opened/closed while the controls are locked.
To turn off Lock, press and hold "4-Hr Delay" button for 3 seconds. Light turns off.
CONTROLS AND CYCLE STATUS
CONTROL PURPOSE
Press to start or resume a wash cycle.
If the door is opened during a cycle or the power is interrupted, the Start/Resume button LED flashes. Cycle
will not resume until door is closed and Start/Resume is pressed.
Press to cancel wash cycle.
Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let dishwasher drain completely.
Press CANCEL again to fully cancel machine.
CAN BE WHAT IT DOES
SELECTED
WITH
Available with Delay 4 hours
any cycle
COMMENTS
The Clean indicator glows when a cycle is finished.
ADDED TIME ADDED
TO CYCLE WATER
GALLONS
(LITERS)
0:00 0
9