Charging A Third Usb Device; Maintaining Your Speaker System - Altec Lansing M202 Guia Del Usuario

Charging a Third USB Device

You can also power and charge a third iPhone or iPod, a non-iPod MP3
player, or other non-docking USB device (e.g. mobile phones, headsets,
digital cameras and more) through the Altec Lansing Octiv Duo speaker
system. Just connect it via the USB jack. Here's how:
1
Locate a USB cable (not included) that will fit the USB port on
the back of the Octiv Duo speaker system and your device.
2
Plug one end of the USB cable into your device.
Your device should have a USB connector on it.
3
Plug the other end of the USB cable into your speaker
system's USB jack.
The USB jack is located on the back of the unit.
Your device is now charging.
12

Maintaining Your Speaker System

Place your speaker system on a level surface away from sources of direct
sunlight or excessive heat.
Protect your furniture with a piece of cloth or other protective material when
placing your speaker system on a natural wood or lacquered finish.
Clean your speaker system with a soft cloth moistened only with mild soap
and water. Stronger cleaning agents, such as benzene, thinner or similar
materials, can damage the surface of the unit.