All-Frame Erase - Olympus D-320L Manual De Instrucciones

NO
124
3
OK
YES OK 3
E

All-Frame Erase

This function works when the lens barrier is closed.
1
Display a picture.
2
Press the Erase mode button and Flash mode button
simultaneously. The All-Frame Erase indicator lights in the
upper right corner of the LCD monitor.
To cancel, press the Erase mode button again.
3
Press the OK (Shutter Release) button to erase all
pictures.
The camera makes a short single beep and the All-
Frame Erase indicator starts descending.
4
All pictures are erased after a few seconds. The blue
background display will appear on the LCD monitor.
If there are any protected pictures, they will not be
erased and the protected picture last taken will be
displayed when the erasing operation is completed.
All-Frame Erase is also available in the Index-Display
mode. (p. 114)
Caution:
Be careful not to erase important picture data by
mistake.
Never open the card cover, eject the card, remove the
batteries, or pull the plug while erasing pictures. It
may destroy the data in the card.
Do not press the Erase mode button while an image
is being loaded onto the LCD.