LG WD-10587BD Manual Del Propietário página 15

H ow to use washer
8. Wash/Rinse Temperature
• Select a water temperature based on the type of
load you are washing.
• Follow the fabric care label and chart below for
best results.
Suggested Wash Temp.
Hot
122°F (50°C)
Warm
104°F (40°C)
Cold
77°F (25°C)
• Warm rinses leave the loads dryer than cold
rinses. Warm rinses increase wrinkling.
• In cold climates, a warm rinse makes the load
more comfortable to handle.
• Cold rinses save energy.
• The Cold rinse temperatures depend on the cold
water at your faucet.
• Warm rinses are regulated at approximately 86°F
(30°C).
• For the Tap Cold/Cold setting, both wash and
rinse temperatures depend on the cold water at
your faucet.
9. Spin speed
• To change the spin speed, press the Spin Speed
button repeatedly to cycle through available
options.
• To start Drain/Spin cycle:
1. Press Power ( ) button to turn on.
2. Press Spin Speed button only.
3. Press Start/Pause (
10. Soil Level
• To change the soil level, press the Soil Level
button repeatedly until the desired setting is on.
11. Beeper
• Press repeatedly to adjust the volume of the
Beeper.
Garment
Whites and Heavy
soiled color-fast items
Most loads
Brightly colored items,
washable woolens
) button.
LED DISPLAY
1. DOOR LOCK INDICATOR
Indicates that the door is locked. The washer door
will lock while the washer is operating. The door
can be unlocked by pressing the START/PAUSE
button to stop the washer.
2. ESTIMATED TIME REMAINING
When the START/PAUSE button is pressed, the
washer automatically detects the wash load
(weight) and optimizes the washing time, based on
the selected cycle and options. The display will
then indicate the estimated time remaining for the
selected wash cycle.
NOTE:
The cycle time displayed may appear much longer
than that of a top-loading washer.
The displayed time is for the complete cycle, rather
than just the agitation portion of the cycle, as is
typically shown on a top-loading washer.
3. CYCLE COMPLETION
INDICATOR
Shows how much of the current wash cycle has
been completed.
4. STATUS/CYCLE DISPLAY
This portion of the display shows the selected
cycle, operating status, and special messages.
If a cycle has special instructions, they will also be
displayed in this area.
1
2
3
4
15