Features; Installation And Operation; Unpacking; Mounting - Optimus MT-1500 Manual De Instalación Y Funcionamiento

2. FEATURES

•
Unique output circuit providing a wider voltage dynamic range with lower distortion, creating a
safe environment for power output transistors, enhancing reliability.
•
Specially designed separate ring-shaped transformer with large volume, providing more power
and lower distortion.
•
Circuit design providing overheating protection, power surge limiter, short circuit protection,
and automatic speed adjusting cooling fan control.
•
Auto power surge protection ensures no surf impulse. Low frequency cutting circuit designed
to protect woofer in case of power crest.
•
Advanced low and mid range frequency booster and high range limiter design. Signal to noise
ratio minimized.
•
MT series built with XLR and 6.35 socket, providing two choices of operation: stereo and
parallel.
•
Output terminals include SPEAKON and BINDING POST.

3. INSTALLATION AND OPERATION

3.1 Unpacking

Carefully open the shipping carton and check for any noticeable damage. Every amplifier is
completely tested and inspected before leaving the factory and should arrive in perfect condition. If
you find any damage, notify the shipping company immediately. Only the consignee may institute a
claim with the carrier for damage incurred during shipping. Be sure to save the carton and all
packing materials for the carrier's inspection. It is a good idea to save the carton and packing
material even if the amplifier has arrived in good condition. Should you ever need to ship the unit,
use only the original factory packing.

3.2 Mounting

The power amplifier will mount in standard 19-inch racks having sufficient depth. The amplifier is
two rack spaces high. Four front panel mounting holes are provided. Rear mounting ears are also
provided for additional support, which is essential in non-permanent installations like mobile or
touring sound systems, but recommended for permanent installations as well. Because of the
cables and connectors on the rear panel, a right angle or offset screwdriver or hex key will make it
easier to fasten the rear mounting ears to the rails.
MT-1500 / MT-3500 Version 1.0
MT-1500 / MT-3500
Power Amplifiers
Page 3 of 9