Air Index - Makita EM2650UH Manual De Instrucciones

EMISSION COMPLIANCE PERIOD
For handheld engine: The Emissions
Compliance Period referred to on the Emissions
Compliance label indicates the number of operating hours for which the engine
has been shown to meet Federal emission requirements.
Category C=50 hours, B=125 hours, and A=300 hours.
An Air Index Information hang tag was supplied to this engine in accordance with the emission
regulations of the California Air Resources Board.
The bar graph on the hang tag shows the emissions performance of this engine.
The bar graph can be used to compare the emissions performance with other available engine.
The lower the Air Index, the less pollution.
The following durability description is to provide you with information relating to the emission
durability period of the engine.
Descriptive Term
Moderate –
Intermediate –
Extended –
Notice: The Air Index Information hang tag must remain on the engine or on the equipment until
it is sold to the ultimate purchaser. Remove the hang tag before operating the engine.

AIR INDEX

Applicable to Emissions Durability Period
50 hours (0-65 cc)
125 hours (0-65 cc)
300 hours (0-65 cc)
25