English; Safety Notes; Product Description And Specifications; Technical Data - Bosch Professional MA 55 Manual Original

Ocultar thumbs Ver también para Professional MA 55:
Tabla de contenido

Publicidad

OBJ_BUCH-1437-003.book Page 6 Friday, March 13, 2015 12:34 PM

6 | English

English

Safety Notes

General Safety Rules
Read all warning notes and instructions en-
closed with the magazine attachment. Fail-
ure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
Save all safety warnings and all instructions for future ref-
erence.
Safety Warnings for Magazine Attachments
 Pull the plug from the mains receptacle and/or remove
the battery from the power tool before making adjust-
ments on the tool or changing tool accessories. Unin-
tentional switching on of the power tool is the cause of
many accidents.
 Hold the machine with a firm grip. High reaction torque
can briefly occur while driving in and loosening screws.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
 Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
 Never direct the machine at yourself or at persons
close by.
 While working, never reach into the magazine attach-
ment and keep your hand clear of the spot, where you
are driving in the screw. Danger of injury from crush-
es/contusions or sharp-edged screws.
 Use only suitable screw strips according to the techni-
cal data. When using other screws, the magazine attach-
ment can become damaged.
 Before any work on the machine (e. g., maintenance,
tool change, etc.) as well as during transport and stor-
age, set the rotational direction switch to the centre
position. Unintentional actuation of the On/Off switch can
lead to injuries.
Product Description and Specifica-
tions
Intended Use
The magazine attachment is intended for efficient driving-in
of drill screws, particle board screws, and wood construction
screws. The magazine attachment may only be used with the
following cordless drill/drivers:
– GSR 6-25 TE (3 601 D45 0..)
– GSR 6-45 TE (3 601 D45 1..)
2 609 932 890 | (13.3.15)
– GSR 18 V-EC TE (3 601 JC8 0..)
– GSR 10,8 V-EC TE (3 601 JE4 0..)
Product Features
The numbering of the product features refers to the illustra-
tion of the magazine attachment on the graphics pages.
1 Screwdriver bit with ball catch
2 Tool holder
3 Screw stop
4 Screw strip*
5 Pin for adjustment of screw length
6 Knurled thumbwheel for screw-in depth
7 Scale for screw-in depth
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Magazine attachment
Article number
Screw dimensions
– Screw length
– Shank diameter, max.
– Diameter of screw head,
max.
Weight, approx.
Assembly
 Before any work on the machine itself, pull the mains
plug.
Mounting the Magazine Attachment
Pull off the drill/driver's standard depth stop, if mounted.
If a standard bit holder is mounted, pull it off toward the front.
You can use an auxiliary tool to remove the bit or bit holder.
Insert the special screwdriver bit 1 into the tool holder 2 of
the drill/driver.
Slide the magazine attachment over screwdriver bit 1 to the
stop on the motor housing.
The magazine attachment can be mounted off-set in 45°
steps in order to achieve a safe and low-fatigue working
stance.
Inserting a Screw Strip (see figure A)
 Insert the screw strip only when the power tool is
switched off.
Slide screw strip 4 toward the front through the strip guide
until the first screw is seated one engaging step behind the
screw stop centre 3.
MA 55
1 600 Z00 00Y
mm
25–55
mm
5
mm
9.5
kg
0.36
Bosch Power Tools

Publicidad

Tabla de contenido
loading

Tabla de contenido