Dispensing Hot Water - KitchenAid KES2102 Instrucciones

Dispensing hot water

Hot water can also be dispensed from the frothing arm. This provides a convenient way to
make Americanos, tea, or hot chocolate. Filling a demitasse with hot water is also a great
way to warm it before brewing espresso.
NOTE: Always dispense hot water into an empty container – dispensing into a cup or
pitcher containing other ingredients may cause splattering.
Press and hold the On/Off power
1
button until the ON indicator lights up.
With the frothing arm pointed into an
3
empty cup, open the Steam Dial by
turning it slowly counter-clockwise.
Then press and hold the Hot Water
button to dispense water.
NOTE: Residual frothing steam may exit the nozzle before water dispenses. It may take
several seconds for water to begin flowing from the nozzle.
16
Wait until the Espresso Machine has
2
reached operating temperature; this
will take approximately 6 minutes.
When the frothing boiler temperature
gauge needle climbs into the "ready"
zone, the Espresso Machine is ready
to dispense hot water.
When the desired amount of water has
4
been dispensed, release the Hot Water
button and close the Steam dial by
turning it clockwise until it stops.