Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
90505019
FS
Circ
Saws
7/14/06
8:50
_Pag
e
16
MAINTENANCE
REMOVE BATTERY FROM SAW WHEN PERFORMING ANY CLEANING OR OTHER
MAINTENANCE.
Use only mild soap and damp cloth to clean the toot. Never let any liquid get inside the
tool; never immerse any part of the toot into a liquid. IMPORTANT: To assure product
SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by
authorized service centers or other qualified service organizations, always using identical
replacement parts
Accessories
Recommended
accessories for use with your tool are available from your local dealer or
authorized service center. If you need assistance regarding accessories, please call:
1-800-544-6986.
Z_WARNING: The use of any accessory not recommended for use with this toot could be
hazardous.
Always use 6-1/2" (165mm) diameter blades for catalog numbers FS1806CS,
FS1806CSL and FS2406CS.
Always use 7-1/4" (184mm) diameter blades for catalog numbers FS1807CS,
FS2407CSL
Carbide blades are strongly recommended for optimum saw performance. NEVER USE
ABRASIVE TYPE OR METAL CUTTING BLADES ON SAW.
Problem
• Unit will not start.
• Battery will not charge.
Troubleshooting
Possible Cause
• Battery not installed properly.
• Battery not charged.
• Battery not inserted into charger.
• Charger not plugged in.
• Surrounding air temperature
too hot or too cold.
Possible Solution
• Check battery
installation.
• Check battery charging
requirements.
• Insert battery into
charger until red LED
appears.
• Plug charger into a
working outlet. Refer to
"Important Charging
Notes" for more details.
• Move charger and toot to
a surrounding air
temperature of above 40
degrees F(4,5°C) or below
105 degrees F (+40,5°C).
For assistance with your product, visit our website www.blackanddecker.com
for the
location of the service center nearest you or call the BLACK & DECKER help line at
1-800-544-6986.
TECHNICAL SPECIFICATIONS
OF LASER:
Laser diode wavelength:
Laser Class:
Operating temperature:
Accuracy:
633-670nm (red color)
Ilia
41°F (5°C) - 104 ° F (40°C)
+/- 1.8mm at every 300 mm
16
Publicidad
Tabla de contenido
