Detection Of Equipment; Devices; Operate Scales In A Wireless Group; Activate Wireless Module (Sys) - Seca 374 Manual De Instrucciones

Detection of equipment

6.2 Operate scales in a wireless group

......
rF
Autosend
......
System
Autoprint
Activate wireless
module (SYS)
If you wish to set up a wireless group with the scales,
they will search for other active devices from the

devices

seca 360° wireless
shown as modules in the display on the scales (e.g.
MO 3). The meaning of the numbers is as follows:
• 1: Personal scales
• 2: Length measuring device
• 3: Wireless printer
• 4: PC with seca USB wireless module
• 7: Baby scales
• 5, 6 and 8-12: Reserved for system expansion
All functions required to operate the device in a
seca wireless group can be found in the submenu "rF".
For information how to navigate in the menu see
page 43.
learn Group (ID)
• on
• off
• on
• off
• HI
• MA
• HI_MA
• off
• Year
• Month
• Day
Time
• Hour
• Minute
The device is supplied with the wireless module disa-
bled. It has to be activated before you can set up a
wireless group.
1. Switch the device on.
system. The devices detected are
• Channel 1 (C1)
• Channel 2 (C2)
• Channel 3 (C3)
NOTE:
When the wireless module is activated, the
power consumption of the device will increase.
We recommend using a power supply unit
when operating the device in a wireless net-
work.
seca 360° wireless Network • 49
English
Stop Reg. Devices (M)