Zhermack VIBRATOR A11 Manual De Uso Y Mantenimiento página 103

MAINTENANCE AND USE MANUAL
Both the VIBRATOR A11 and VIBRATOR A12 have been designed for use on a rigid worktop parallel to
the floor. Suitable worktops include service furniture (where the operator is standing) or modelling
tables (where work is done sitting down). All worktops must be checked for
stability.
The user must provide a power connection with relative socket near the equipment installation point.
The user must also install an adequate electrical circuit breaker upstream from the socket as well as
efficacious overload/indirect contact safety devices.
Connection is effected via the power lead (see Fig.2, paragraph 6.5). Check the following:
• that mains voltage and frequency are as indicated on the identification plate (incorrect power
supply voltage may damage the equipment).
• that the mains supply has a proper, efficient earth connection.
It is forbidden to tamper with the power lead and its plug.
A proper earth connection is compulsory. Should it temporarily be necessary
to use an extension lead the latter must comply with the standards in force in
the country of use.
VIBRATOR A11/A12
EN
2
A 1
CONNECTING UP TO THE POWER SUPPLY
Worktops
6.3.1
6.4
103 of 176