Zhermack VIBRATOR A11 Manual De Uso Y Mantenimiento página 106

4
Figure
3
5
Figure
6
Figure
USING THE VIBRATOR A12
7.4
7
Figure
106 of 176
Fig. 4: Press the Main Switch (2). The green LED comes
2
on.
1
A 1
Fig. 5: Adjust vibration intensity by turning the
Electronic Regulator (3) clockwise.
1
A 1
Fig. 6: Once work is over switch off the equipment by
turning the Electronic Regulator anticlockwise until you
3
hear a click which indicates that the equipment has been
stopped.
1
A 1
Then turn off at the Main Switch (2): the green indicator
light will go out (see Fig. 4).
Fig. 7: Place the cup containing the plaster or coating to
be treated on the rubber top.
2
A 1
MAINTENANCE AND USE MANUAL
EN
VIBRATOR A11/A12