Problems, Causes And Remedies - Zhermack VIBRATOR A11 Manual De Uso Y Mantenimiento

WARNING
9.1
Should any of the anomalies described below occur try setting the situation right, as
far as is permissible, by following the instructions contained in this handbook. Should
the problem persist contact your Authorised Servicing Centre.

PROBLEMS, CAUSES AND REMEDIES

9.2
p
RoBlem
VIBRATOR A11
With the main switch
in position "I" the
equipment fails to
come on and the
indicator light on the
main switch does not
come on.
VIBRATOR A12
Rotating the
regulator/switch (with
the plug inserted in
the mains socket) the
equipment does not
come on and the
indicator light does
not come on.
Vibration is irregular
and/or noisy.
110 of 176
CHAPTER 9: TROUBLESHOOTING
C
ause
1. Plug not inserted correctly
in socket.
2. Main fuse blown.
1. Vibration plate attachment
screws may be loose.
MAINTENANCE AND USE MANUAL
EN
R
emeDy
1. Check plug is properly inserted.
2. Replace fuse with one of identical
specifications.
1. Contact your Authorised Servicing
Centre.
VIBRATOR A11/A12