Zhermack VIBRATOR A11 Manual De Uso Y Mantenimiento página 91

MAINTENANCE AND USE MANUAL
This Use and Maintenance Manual provides information on the utilisation, installation and
maintenance of the plaster and coating vibrator models VIBRATOR A11 and VIBRATOR A12, made by
Zhermack
• Vibrator A11 and A12 must be used in accordance with the instructions in this manual: it is therefore
recommended that you read it carefully prior to installation and start-up. Make sure that you read
the entire manual and pay particular attention to messages written in bold type or items highlighted
by boxes and/or symbols: the symbols are designed to highlight situations involving danger or
requiring caution (see paragraph 1.2).
• Observance of standards and regulations shown in this manual will ensure that the equipment is
used properly and that maintenance work is carried out safely.
• This Use and Maintenance Manual is an integral part of the equipment: it should therefore be kept
together with the apparatur so that it can be consulted as and when necessary (keep the booklet in
a secure a dry place away from sunlight, atmospheric agents, etc.). It must be available for
consultation throughout the working life of the vibrator even when the equipment is sold or finally
dismantled.
• It is recommended that you keep this manual constantly updated by integrating any amendments,
additions or modifications made by the Manufacturer. Any notes or comments should be made on
the blank pages at the rear of the booklet (see Appendices: Note).
• Use the manual properly so that it is not damaged in any way.
• Do not remove, tear or write on any part of the pages.
• If the manual is lost or damaged and its contents become illegible you can request a replacement
copy from the Manufacturer.
The purpose of this Use and Maintenance Manual is to provide users with information on how to
operate the equipment properly. The manual contains all the information needed to use the device as
intended: in particular the manual includes instructions and information on the
following:
• Correct equipment installation;
• Detailed description of how the vibrator works and its components;
• Initial start-up;
• Scheduled maintenance;
• Basic Safety and Accident Prevention info.
This manual contains nine chapters each of which covers a specific argument.
The appendices at the rear of the manual are a useful complement to these chapters.
VIBRATOR A11/A12
EN
CHAPTER 1: INTRODUCTION
HOW TO READ AND USE THIS MANUAL
1.1
91 of 176