Accessories; Trouble-Shooting - Festo ELFA-RF Instrucciones De Utilizacion

ELFA-RF
9

Accessories

Maintenance accessories
Oil gun
Oil cartridge
Oil
1) (Spare parts catalogue è www.festo.com/spareparts)
Tab. 4
10

Trouble-shooting

Malfunction Possible cause
Squeaking Tension
noises, vibrations
or the axis is not
running smoothly
Roller bearing guide is
defective
Lack of lubrication on the
roller bearing guide
Wear on guide or band
diverter
Slide does not Loads too high
move Mounting screws for the
payload are too long
Slide travels Proximity sensor not sensing Check proximity sensor, connections and
beyond the end
position
Cover band has Wear on band diverter
waves
Oil leak between Oil accumulator completely
profile housing saturated
and cover
Tab. 5
Festo – ELFA-RF – 1509b English
Part number/type
1)
8041022/AZTP-S-L
8041024/AZLO-H1-C-10
Elkalub VP916, Chemie-Technik, Vöhringen
Remedy
Install the ELFA in such a way, that it is free of
tension (evenness of the bearing surface
è 5.1 Mechanical installation).
Change the arrangement of the payload.
Align the ELFA so that it is exactly parallel to the
second axis.
Alter the travel speed.
Return the ELFA to Festo for repair.
Lubricate the ELFA (è 7 Maintenance and care).
Return the ELFA to Festo for repair.
Reduce load mass/torques.
Comply with the max. screw-in depth
(è 5.1.2 Mounting the payload).
controller.
Retension the cover band
(è 7 Maintenance and care).
Replace band diverter (spare parts catalogue
è www.festo.com/spareparts).
Replace oil accumulator.
1)
23