ELFA-RF
6
Commissioning
Warning
Unexpected movement of components.
Injury due to impact or pinching.
Ensure that there are the following precautions:
– Nobody can reach into the path of the moving
components (e.g. by providing a protective
guard).
– There are no foreign objects in the travel
range.
It should not be possible to touch the ELFA until
the load has come to a complete standstill.
Commission the unit following the operating instructions for the drive axis (e.g. ELGA-TB-RF).
7
Maintenance and care
Clean the ELFA guide axis as required with a soft cloth.
Any agents that do not damage the material may be used as cleaning agents.
In the case of ELFA-RF-...-P0, check the installation space of the guide for foreign objects and re
move these if present.
Lubrication of the roller bearing guide:
Note
The lubrication interval S
lowing factors can contribute here:
– Dusty and dirty environment
– Nominal strokes 2000 mm
– Speeds 2 m/s
– Travel profile Z delta operation (frequent acceleration and braking)
– Ambient temperatures +40 °C
– Product has been in operation for 3 years.
If one of these factors applies, halve the lubrication interval S
If several factors apply at the same time, reduce the lubrication interval by three-
quarters.
Festo – ELFA-RF – 1509b English
depends on the load that is acting on the product. The fol
int
Fig. 8
(èFig. 9).
int
21