Amana ASB2623HRQ Guía De Uso Y Cuidado página 10

Touch Temperature Controls
(select models, style varies by model)
The controls are located at the top front of the
refrigerator compartment.
Contro[
_!!iii}ii, Freeze d
[initial Centre[ Settings
After phgging tile refrigerator in, set the controls.
, Pressing the 1_i, or pads adjusts the controls to
the desired setting.
, Set the freezer control on/4.
, Set the refrigerator control on/4_
Let the refrigerator run at least 8 to 12 hours before
adding food.
Warm Cabinet Surfaces
At times, the front of the refrigerator cabinet may be
warm to the touch. This is a normal occurrence that
helps prevent moisture from condensing on the
cabineL This condition wiI[ be more noticeable when
you first start the refrigerator, during hot weather and
after excessive or lengthy door openings.
Adjusting the Controls
2/4 hours after adding food, you may decide that one
or both compartments should be colder or warmen If
so, adjust the control(s} as indicated in the
Temperature Control Guide table below. See page 21
for instructions on checking compartment
temperature.
, Except when starting the refrigerator, do not change
either control more than one number at a time.
Allow 2/4 hours for temperatures to stabilize.
Temperature Control Guide
Refrigerator too warm Set the refrigerator control
to next higher number by
Refrigerator too cold
Freezer too warm
Freezer too cold
Turn refrigerator OF[:
Set the refrigerator control
[to next lower number by
Set the freezer contro[ to
[Set the freezer control to
next lower number by
Press the freezer or
[ refrigerator :_ pad until a
dash "-" appears in the
display.