Connecting The Water Supply - Amana ASB2623HRQ Guía De Uso Y Cuidado

. If tube end is damaged, cut off %" before
reconnecting.
If leaking occurs, reconnect the line.
3, Close doors.
/4, Remove top hinge covers by
removing Phillips screws.
5, Unscrew %_" hex head screws from
top hinges.
For water dispensing
models only:
Do not remove screw
connecting green ground
w i re,
6. For ice and water dispensing models only:
Detach main wire connector harness and red wire
harness.
" To detach main wire
harness, use a fiat blade
tool or fingernail to press
junction point between two .......
connectors to release.
, To detach red wire harness, press
tab on underside of connector to
release.
7. Remove top hinges along with doors.
Repmacing the Doors
To replace the doors, follow the steps in Door and
Hinge Removal in reverse order.
UMPORTANT: If water line tube end is damaged, cut
off 5%,before reconnecting.
Connecting the Water Supply
(select models}
8. Remove bottom hinges with a _" hex head driver.