Stove Rating/Cabin Size/Connection Table; Connection Diagram For Stove With Integrated Control 3.6 Kw; Base Plate Removal/Insertion; Positioning The Sauna Stones - Karibu 52766 Instrucciones De Montaje Y De Servicio

BA Saunaofen interne SteuerungNEU2:Saunaofen Thermic Kompakt 8spr
GB
Table 1
Heater
Stove with Plug&Play
integrated control 3.6 kW
Connection diagram
Stove with integrated control 3.6kW Plug & Play
Base plate removal and insertion
The base plate can be removed for cleaning purposes.
To do this, move the rotary bolt as far as possible and then remove the
base plate downwards.
Fit it again using the same procedure in reverse; the lugs must be inser-
ted into the slots and locked.
Important: Only remove the base plate when the stove is cool.
10
Power Cabin volume
Watt min.m 3
3600W 2m 3
24.06.2010 15:19 Uhr
max.m 3 Voltage
4m 3 230V AC
Position the sauna stones on the stone grid
Sauna stones are a natural product. The stones have been cleaned befo-
re delivery but we recommend that you clean them with water before you
position them in the stove. Do not use stones unless they are designed for
use in a sauna. Use a maximum of 12 kg of stones.
Important. Position the stones loosely and remove any stones that are too
small. If the stones are packed too tightly they will affect the air circulation
and will result in the sauna stove and cabin walls overheating and a fire
risk. In addition, stones that are packed too tightly will adversely affect the
cabin temperature.
The warranty will be voided if you use stones other than those recom-
mended by the manufacturer and for damage caused by filling the stone
chamber incorrectly. Turn the stones at least once per year, remove any
stones that are too small and remove all stone dust and stone splinters.
We recommend that you replace the stones every two years.
Important. If you cover the stove and fill the stone container incor-
rectly the unit may cause a fire.
Do not use the stove without sauna stones.
Seite 10
Connection
Silicon cable Fuse
3x1,5 1x16A