Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2. Install the ceiling canopy and attach
with (2) M4 x 20 large head torx drive
screws. Fig. 23. Remove the protec-
tive coating.
3. Attach the Lower Arm Covers with (4)
M4 x 20 pan head screws. Remove
the protective coating. Fig. 24 and
Fig. 25.
4. Bend the two ears on the Lower Arm
Cover over the Upper Arm Cover.
Repeat for the other cover. Fig. 26.
EARS
Fig. 26
- 15 -
M4 X 20
SCREWS (4)
M4 x 16 LARGE
HEAD
SCREWS (2)
Fig. 23
Fig. 24
Fig. 25
Publicidad
Tabla de contenido
