Double Din Radio Provision; Kit Assembly - Metra 95-7624 Instrucciones De Instalación

Double DIN radio provision

1. Attach your corresponding bracket
to the radio housing trim panel.
(Bracket #2 with the standard radio
trim panel shown) (Figure A))
2. Slide the radio into the assembly
and secure with screws supplied
with the radio. (Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
4. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.

95-7624 Kit Assembly

Kit Assembly
(Figure A)
(Figure B)
16