Tercel 1987-1990; Tercel 1991-1994; Tercel 1995-1998 - Metra 88-00-8000 Instrucciones De Instalación

Toyota iso pocket 1981-2004
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Tercel 1987-1990

1. Remove (1) Phillips screw located above the
ignition switch. Remove the climate control
knobs. Unclip the dash trim bezel and remove.
Remove (4) Phillips screws securing the
factory radio assembly and disconnect the
wiring. Remove (2) screws securing the factory
cupholder to the assembly and remove. Remove
(4) screws securing the ashtray/cigarette lighter
to the assembly and remove. (Figure A)
Continue to kit assembly
(Figure A)
88-00-8000
Dash Disassembly

Tercel 1991-1994

1. Pry up on the radio trim bezel and remove.
Remove (4) Phillips screws securing the factory
radio and disconnect the wiring. Remove the
screws securing the factory cupholder to the
assembly and remove. Remove the screws
securing the factory ashtray/cigarette lighter to
the assembly and remove. (Figure A)
Continue to kit assembly
(Figure A)
11

Tercel 1995-1998

1. Unclip the bottom of the radio trim bezel. Unhook
the top of the radio trim bezel and remove the
bezel. Remove (4) 8mm Phillips screws securing
the factory radio and disconnect the wiring.
(Figure A)
Continue to kit assembly
(Figure A)

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido