Corolla (Sedan/Wagon-Lower Dash) 1988-1992; Corolla (Sedan/Wagon-Upper Dash) 1988-1992; Corolla (Lower Dash) 1993-1997 - Metra 88-00-8000 Instrucciones De Instalación

Toyota iso pocket 1981-2004
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Corolla (sedan/wagon-lower dash) 1988-1992

1. Remove (1) screw located to the right of the
ignition switch. Remove (1) screw located above
the driver's side speaker. Carefully unsnap the
dash trim bezel (some force may be required).
(Figure A)
Continue to kit assembly
(Figure A)
88-00-8000
Dash Disassembly

Corolla (sedan/wagon-upper dash) 1988-1992

1.
Remove (4) screws from the top edge of the
instrument trim bezel and (2) screws below the
radio opening. Remove (1) screw from the lower-
left tab of the bezel (to the right of the a/c vent)
and unsnap the bezel. (Figure A)
Continue to kit assembly
1
(Figure A)
6

Corolla (lower dash) 1993-1997

1. Remove the climate control knobs, unsnap the
upper trim bezel and disconnect the hazard and
clock leads. Remove (2) screws from the lower
trim bezel and remove. (Figure A)
Continue to kit assembly
(Figure A)

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido