Geo Storm 1990-1993 (Discarding Factory Pocket); Isuzu Impulse 1990-1993 (Discarding Factory Pocket); Isuzu Stylus 1990-1991 (Discarding Factory Pocket) - Metra 99-3400 Instrucciones De Instalación

Geo Storm/Isuzu Impulse 1990-1993
Isuzu Stylus 1991-1993
1. Remove the ashtray and the (2)
outermost screws exposed in the
ashtray cavity. (Figure A)
2. Remove (2) screws from each side of
the dash console. (Figure A)
3. Remove the climate control knobs.
Unclip the radio trim bezel.
4. Remove (4) screws from the metal
console support.
5. Remove the factory head unit assembly
and disconnect the wiring.
6. Remove (4) screws securing the factory
pacer plate to the radio brackets and
remove the plate.
7. Cut and remove all mounting tabs
on brackets set #2 except tabs "C".
(Figure B)
8. Mount the converted brackets to the
radio housing with (6) #6 Phillips
screws supplied.
9. Slide the factory spacer plate onto the
brackets and mount through holes "A"
with the (2) supplied Phillips. (Figure C)
Continue to kit assembly
Dash Disassembly 99-3400
(use if NOT keeping factory pocket)
(Figure A)
"C"
(Figure B)
"A"
(Figure C)
6
"C"
"C"
"C"
"A"